top of page

Originally produced as a one-off, custom build, here we have the CARVED DIABLO. Slightly deeper than the standard Diablo at 350mm (13.77") x 76mm (3") with florentine cut-away, the CARVED DIABLO is produced with a hand carved spruce sound-board & 3-ply laminated maple back & sides, maple neck, and complemented with solid maple binding throughout. The CARVED DIABLO comes as standard with Indian ebony fingerboard, scratch-plate, floating bridge & tailpiece.

Produced in Oxford, the CARVED DIABLO is fitted with a KRIVO, Jon Dickinson, or Kent Armstrong floating humnucker, or set-in OX4 as standard. Completely hand wired in shielded, steel braided cable for increased performance and stability, the CARVED DIABLO is beautifully finished in antique walnut nitrocellulose lacquer, with gold Gotoh SGS510Z tuners, giving this archtop an elegant, contemporary vibe.

DIABLO CARVED TOP 2.jpg

Hand Carved

Spruce Top/ Laminated Maple Back/sides

DIABLO CARVED OIL KRIVO.jpg
DIABLO FOR WEB AUDIO.jpg

  • Body Style- Arched back and top, Florentine Cut-away

  • Body Width at Lower Bout- 350mm (13.77")

  • Body Length- 465mm (18.30")

  • Body Depth- 76mm (3")

  • Top Wood- Hand Carved Spruce

  • Back & Sides- 3 ply Maple

  • Body Binding- Solid Maple

  • F Hole Binding- N/A

  • Neck Profile- 44.4mm (1.75")at Bone Nut, 59mm (2.32") End Fret, 14" Radius

  • Neck Construction- Maple

  • Neck Binding- Solid Maple

  • Finger Board- Indian Ebony Fingerboard, No Inlay

  • Neck Scaling- 625mm, (24.6") Dove Tail Joint at 15 F

  • Frets- 22 Jescra EVO Gold

  • Bridge- Indian Ebony Floating

  • Finger Rest- Indian Ebony Floating

  • Tailpiece- Indian Ebony Floating

  • Tuners- Gold Gotoh SGS510Z

  • Pickup- KA, KRIVO, Dickinson Floating or OX$ Set-in

  • Pots- Premium CTS 500K Audio Sweep Tone/ Volume with Ebony Knobs

  • Caps- WD Oil & Paper 0.47

  • Output Jack- Switchcraft Gotoh plate

  • Wiring- Shielded Braided Steel

  • Finish- Antique Walnut Nitrocellulose 

  • Strings- Thomastik Infield 12-52

  • Case- Hiscox Insulated Flight Case

  • Weight- 2.1kg

DIABLO CARVED OIL HEADSTOCK.jpg
DIABLO CARVED OIL KNOBS.jpg

Nitrocellulose

or Oil Finishing

Gotoh Tuners,

Premium CTS,

Switchcraft Components

RRP

£3,199.99

Inc Hiscox

Flight Case

Ebony

Peripherals

DIABLO BACK.jpg

Shielded Steel

Braided Wiring

Available

with Set-in OX4

or Floating

KRIVO

CARVED DIABLO​

bottom of page