Originally produced as a one-off, custom build, here we have the CARVED DIABLO. Slightly deeper than the standard Diablo at 350mm (13.77") x 76mm (3") with florentine cut-away, the CARVED DIABLO is produced with a hand carved spruce sound-board & 3-ply laminated maple back & sides, maple neck, and complemented with solid maple binding throughout. The CARVED DIABLO comes as standard with Indian ebony fingerboard, scratch-plate, floating bridge & tailpiece.

Produced in Oxford, the CARVED DIABLO is fitted with a KRIVO, Jon Dickinson, or Kent Armstrong floating humnucker, or set-in OX4 as standard. Completely hand wired in shielded, steel braided cable for increased performance and stability, the CARVED DIABLO is beautifully finished in antique walnut nitrocellulose lacquer, with gold Gotoh SGS510Z tuners, giving this archtop an elegant, contemporary vibe.

DIABLO CARVED TOP 2.jpg

Hand Carved

Spruce Top

DIABLO CARVED OIL KRIVO.jpg
DIABLO FOR WEB AUDIO.jpg
  • Body Style- Arched back and top, Florentine Cut-away

  • Body Width at Lower Bout- 350mm

  • Body Length- 465mm (18.30")

  • Body Depth- 76mm (3")

  • Top Wood- Hand Carved American Spruce

  • Back & Sides- 3 ply American Maple

  • Body Binding- Solid Maple

  • F Hole Binding- N/A

  • Neck Profile- 44.4mm (1.75")at Bone Nut, 59mm (2.32") End Fret, 14" Radius

  • Neck Construction- Maple

  • Neck Binding- Solid Maple

  • Finger Board- Indian Ebony Fingerboard, No Inlay

  • Neck Scaling- 625mm, (24.6") Dove Tail Joint at 15 F

  • Frets- 22 Jescra EVO Gold

  • Bridge- Indian Ebony Floating

  • Finger Rest- Indian Ebony Floating

  • Tailpiece- Indian Ebony Floating

  • Tuners- Gold Gotoh SGS510Z

  • Pickup- KA, KRIVO, Dickinson Floating or OX$ Set-in

  • Pots- Premium CTS 500K Audio Sweep Tone/ Volume with Ebony Knobs

  • Caps- WD Oil & Paper 0.47

  • Output Jack- Switchcraft Gotoh plate

  • Wiring- Shielded Braided Steel

  • Finish- Antique Walnut Nitrocellulose 

  • Strings- Thomastik Infield 12-52

  • Case- Hiscox Insulated Flight Case

DIABLO CARVED OIL HEADSTOCK.jpg
DIABLO CARVED OIL KNOBS.jpg

Nitrocellulose

Finishing

Gotoh Tuners,

Premium CTS,

Switchcraft Components

RRP

£2,999.99

Inc Hiscox

Flight Case

Assembled & Hand Finished 

In The UK

DIABLO BACK.jpg

Shielded Steel

Braided Wiring

Available

with Set-in OX4

or Floating

KRIVO

CARVED DIABLO

  • Grey Facebook Icon
  • Grey Twitter Icon
  • Grey Instagram Icon

FIBONACCI ® is a Registered Trade Mark. 2020 All Rights Reserved Fibonacci Guitars LTD 09762985. Accounts Registered Office Only:  20-22 Wenlock Rd London N1 7GU,  

Workshop/ Demo room: 7a Latimer Close, Worcester Park SW London KT4 8UF (by appointment only)

Tel: +44 (0) 7367 818 571. Email: admin@fibonacci-guitars.com.

Every effort is taken to ensure product specifications are correct at the time of publishing but please confirm details prior to purchase. Colour discrepancies may occur between RGB monitor displays and the final product. You can view our full here: Terms & Conditions 

FLAME MAPLE VENEER